How to Pair Budweiser Wireless Earbuds with Your Phone
By GabbaGoods - Everyday Consumer Electronics – Gabba Goods | Published: 2026-10-28
Category: How-to Guides
Follow these simple steps to pair your Budweiser Wireless Earbuds with any smartphone. Get crisp sound in minutes.
Quick Answer
Put your Budweiser Wireless Earbuds into pairing mode by holding the button on the charging case, then select them from your phone's Bluetooth menu.
Before You Start
Make sure your earbuds are charged. The Budweiser Wireless Earbuds offer about 7 hours of playtime and 100 hours of standby time, so a full charge gives you plenty of room to complete the setup.
Keep your phone close (within 3 feet) and ensure Bluetooth is turned on. If you've previously paired the earbuds with another device, forget that connection first to avoid confusion.
How to Pair Budweiser Wireless Earbuds
- Step 1: Charge the earbuds: Place both earbuds into the charging case and close the lid. Plug the case into a USB-C charger (or the included cable) until the LED indicator shows a solid light. A common mistake is trying to pair with a dead battery—always start with a full charge.
- Step 2: Enter pairing mode: Open the charging case lid and locate the small button on the front or side of the case. Press and hold it for about 3–5 seconds until the LED flashes red and blue (or white). This tells you the earbuds are discoverable. If the light doesn't flash, try holding the button longer or check that the earbuds are properly seated. If the LED never flashes, the earbuds may already be connected to another device. Disconnect that device first.
- Step 3: Connect via your phone: On your phone, open the Bluetooth settings menu. Wait for “Budweiser Wireless Earbuds” to appear under available devices—this can take up to 10 seconds. Tap the name to pair. You may hear a confirmation tone or see a “Connected” message. A common mistake is selecting a similar name from a previous pairing; make sure it's the current Budweiser model. If the name doesn't appear, close the Bluetooth menu, wait 5 seconds, and reopen it. If it still fails, restart your phone and try again.
- Step 4: Confirm and test: Once connected, play any audio from your phone to test the sound. Adjust volume using your phone or the earbuds' touch controls (if available). If only one earbud plays audio, both earbuds may not be paired together—place them back in the case, close the lid, and repeat step 2. For future use, the earbuds will auto-pair with your phone when you open the case—no need to repeat these steps.
Product Facts
- Budweiser Wireless Earbuds: Budweiser Wireless Earbuds deliver powerful HD sound with a comfortable, secure fit. Once paired, you can enjoy clear audio during workouts, commutes, or casual listening without worrying about the earbuds falling out.
Budweiser Wireless Earbuds
